M26/M27, Side Panels Mounted On Right And Left - Siemens SINAMICS S120 Manual

Options

8.39 M26/M27, side panels mounted on right and left

Note
See also the chapter titled "Maintenance and servicing", "Replacing the filter mats" section.
8.39 M26/M27, side panels mounted on right and left
Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Modules
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Booksize Base Cabinets
● Chassis format Motor Modules
● Central Braking Modules
● Auxiliary Power Supply Modules
Description
The side panels (option M26 = side panel mounted on the right; option M27 = side panel
mounted on the left) are fitted at either end of a side-by-side cabinet unit configuration.
With the option M26, the Cabinet Module is fitted with a side panel on the right.
With the option M27, the Cabinet Module is fitted with a side panel on the left.
For each cabinet row installed, you must mount one side panel on the right (option M26)
and one on the left (option M27).
For Cabinet Modules that are delivered with a side panel, the DC connection clamp is
omitted from the side panel. If the installation sequence is modified and the side panel
removed, then a DC connection clamp must be inserted!
462
DANGER
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A