Description - Siemens SINAMICS S120 Manual

Cabinet Modules
5.8 Auxiliary Power Supply Modules
5.8.2

Description

Note
Refer to the layout diagrams and circuit diagrams provided on the enclosed customer DVD
for the arrangement of components and interfaces, and for wiring.
Auxiliary Power Supply Modules supply power to the auxiliary power supply system of the
SINAMICS S120 Cabinet Modules as well as to other external loads. Among other things,
the fans of the SINAMICS S120 devices installed in the Cabinet Modules are connected to
this busbar system. In addition, the auxiliary power supply system supplies the electronics
modules with external 24 V DC. This is required when the DC link is not charged in order, for
example, to maintain PROFIBUS communication.
The 230 V AC power supply can also be fed in externally via an uninterruptible power supply
(UPS) and terminal -X46.
NOTICE
The same rated voltage must be fed into the supply infeed of the Auxiliary Power Supply
Module as for the connected Cabinet Modules, as the voltage fed into the Auxiliary Power
Supply Module supplies the entire system with auxiliary voltage via the auxiliary power
supply system.
If a different voltage than that of the connected Cabinet Modules is fed in, there is a risk of
an insufficient energy supply to the device fans or too high a voltage, which can cause
damage to the system.
230
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A