Siemens SINAMICS S120 Manual page 111

Cable routing of signal cables to the customer terminal block –X55
1. Feed the cable for the customer terminal block into the cabinet from the bottom left.
2. Use cable ties to secure the cable at suitable points.
3. Guide the cable further up into the cabinet and, when it reaches customer terminal block -
4. Use cable ties to secure the cable at suitable points.
5. Connect the cables to the customer terminal block -X55.
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A
Frame size:
FX+GX HX+JX
X55, guide it to the left or right to -X55. When doing so, route the cable in a similar
manner to the standard cables that have already been installed in the cabinet.
Electrical installation
4.4 Connections
111