Replacing The Power Block, Frame Size Jx - Siemens SINAMICS S120 Manual

6.4.7.6

Replacing the power block, frame size JX

Replacing the power block
Figure 6-10
Preparatory steps
● Observe the "five safety rules".
● Remove the protective cover.
● Allow unimpeded access to the power block.
● Set up the installation device for the power block and keep it at hand (see the section
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A
Replacing the power block, Active Line Module, Smart Line Module, and Motor Module,
frame size JX
titled "Installation device for power blocks").
Maintenance and servicing
6.4 Replacing components
267