Leds On The Smc10 Sensor Module - Siemens SINAMICS S120 Manual

7.11

LEDs on the SMC10 Sensor Module

Table 7- 16 Meaning of the LEDs on the SMC10 Sensor Module
LED Color
---
Green
Orange
Red
Green/
RDY
red
(READY)
Green/
orange
or
red/
orange
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A
Status Description
Off The electronics power supply is missing or out of tolerance.
Steady light The component is ready for operation and cyclic DRIVE-CLiQ communication is
taking place.
Steady light DRIVE-CLiQ communication is being established.
Steady light At least one fault is present in this component.
Note:
LED is driven irrespective of the corresponding messages being reconfigured.
Flashing Firmware is being downloaded.
light
0.5 Hz
Flashing Firmware download is being completed.
light Waiting for POWER ON.
2 Hz
Flashing Component recognition via LED is activated (p0144).
light
Note:
2 Hz
Both possibilities depend on the LED status when activated via p0144 = 1.
7.11 LEDs on the SMC10 Sensor Module
Diagnostics
325