Displaying Unit Identity - Paradyne 3160-A4 Operator's Manual

3. Using the Front Panel

Displaying Unit Identity

The identity of the DSU/CSU (serial number, model number, software revision
level, hardware revision level, and customer identification) is available through the
Status branch of the front panel menu (see
The customer identification is the only identity number you can change.
Procedure
To display the DSU/CSU's identity (ID):
3-10
NOTE:
The following procedures are examples only. Screen displays may vary
depending on the model of the DSU/CSU.
1. From the top-level menu screen, select Stat.
DSU ESF
Stat Test
F2
F1
2. From the Status screen, press the
screen.
3. Select ID.
Status:
TStat LED
F2
F1
March 2001
Appendix A, Front Panel Menu
Cnfig
F3
key until the ID selection appears on the
ID
F3
).
3160-A2-GB24-10