Lamp Test; Starting A Lamp Test - Paradyne 3160-A4 Operator's Manual

Lamp Test

Use the Lamp Test commands to start and stop a test of the DSU/CSU front panel
LCD and LEDs.

Starting a Lamp Test

Procedure
To start a Lamp test:
3160-A2-GB24-10
5. From the Abort screen, press the Function key that corresponds to the
network or port for which you want to abort a test pattern. Use the scroll keys,
if necessary.
Abort: Send or Mon
NET Prt1
F1 F2
The DSU/CSU terminates the selected test pattern and displays the message
Command Complete.
1. From the top-level menu screen, select Test.
2. From the Test screen, press the
the screen.
3. From the Test screen, select Lamp.
Test:
Lpbk Ptrns
F1 F2
4. From the Lamp Test screen, select Start.
Lamp Test:
Abort Start
F1 F2
March 2001
Prt2
F3
key until the Lamp selection appears on
Lamp
F3
F3
8. Testing
8-21