Lcd - Paradyne 3160-A4 Operator's Manual

3. Using the Front Panel
ACCULINK
NET
In
3160
Out Out
Figure 3-1.

LCD

The LCD
T
T
Figure 3-2.
The LCD displays status messages as requested via the Device Health and Status
branch of the front panel menu (see
Chapter 7, Monitoring and Troubleshooting ). In addition, the highest level status
message appears on the front panel automatically if no front panel action has
occurred at the DSU/CSU for the past five minutes.
The LCD also lists commands, configuration options, and test results. In most
cases, the top line shows the command or option name and default value, while
the second line displays options and responses. When a response is required,
select from the options displayed directly above the Function keys (F1, F2, F3);
make your choice by pressing the corresponding Function key.
3-2
MON EQPT
In In
OK FAIL TEST
Out
Standalone DSU/CSU Front Panel
(Figure 3-2, LCD) displays two types of data:
Messages such as alarms, command/test completion, and action in progress
Front panel menu tree information (see
F1 F2
LCD
March 2001
LCD
F1 F2 F3
SIG OOF ALRM EER SIG OOF
NETWORK DTR TXD
Appendix A, Front Panel Menu
F3
Device Health and Status Messages
ALRM PDV BPV
RXD CTS RTS
496-14936
)
in
3160-A2-GB24-10