7. Monitoring and Troubleshooting
Self-Test Health Messages
Use the Self-Test Health command to display the results of the power-on self-test.
Possible messages are listed in
Chapter 2, Installation
Procedure
To display power-on self-test results:
7-2
, for more information about power-on self-test.
1. From the top-level menu screen, select Stat.
DSU ESF
Stat
Test
F1
F2
2. From the Status screen, select STest.
Status:
DevHS
STest
F1
F2
3. View the results of the last power-on self-test. If no problems were found
during power-on, the following message appears.
STest Health:
Passed
F1
F2
March 2001
Table 7-1, Self-Test Health
Cnfig
F3
Perf
F3
F3
Messages. See
3160-A2-GB24-10