Paradyne 3160-A4 Operator's Manual page 313

DTE Drop/Insert interface
channel allocation procedure, 4-24
configuration options, C-2
failure message, 7-3
functional description, 1-2, 1-7, 2-1
managed by SNMP, F-1
physical description, 1-5–1-6
pin assignments, E-3
technical specifications, B-2
troubleshooting, 7-16
DTE loopback (DLB), 8-11
configuration option, C-3
external control interface, E-3
E
EER (Excessive Error Rate) condition
ASCII terminal/printer message, 7-13
Device Health and Status message, 7-5
front panel LED indication, 3-7–3-8
Performance Report message, 7-11
troubleshooting, 7-16
EIA-530-A interface, E-9
Embedded Data Link (EDL)
configuration option, C-6–C-7
used with SNMP system, 1-3, 2-3–2-4, G-1
enterprise-specific trap, 7-14
environmental specifications, B-1
equalization
line, C-2
error messages, 7-10
ES (Errored Seconds) report, 7-10
Ethernet port
configuring, 4-9
connector, E-4
IP address, 4-10, C-27
protocol, C-26
statistics, 7-12
external modem interface, E-15
F
Facility Data Link (FDL)
configuration option, C-8
used with SNMP system, 1-3, 2-3–2-4, G-2–G-3
Facility Interface Code, D
Fact1 (Factory 1) configuration area
functional description, 4-3
Fact2 (Factory 2) configuration area
functional description, 4-3
failure analysis, 7-16
failure message
during power-up self-test, 2-11, 7-6
troubleshooting, 7-16
features, 1-1
3160-A2-GB24-10
fractional T1, 2-1–2-2
framing configuration option, C-2, C-8
front panel
acquiring/releasing the user interface, 5-5
operation, 3-1
pass-through, 6-4
physical description, 1-3, 3-1
Front Panel Emulation
cabling example, 2-9
functional description, 1-2, 3-1, H-1
installation and operation, H-1
G
gateway
default, 4-12
Gen (General) Configuration branch
example of use, 4-42
option table, C-16
option worksheet, D-2
government regulations
Canada, E
government requirements
United States, D
I
ID (Identity) branch
example of use, 3-10
identity
displaying, 3-10
indicators, 3-5
integral modem, D, 6-1
IP (Internet Protocol) addressing
configuration option, C-35–C-36, C-38
default gateway, 4-12
example of use, G-1
for 10BaseT port, C-27
procedure for configuring, 4-10, 4-15, 4-23
K
keypad
operation, 3-3
physical description, 1-3, 3-1
L
lamp test, 8-21
LAN Adapter, 1-3, 1-7, 2-3–2-4, 4-14
LAN cable, E-4
LEDs
display from Status branch, 3-13
displaying using asynchronous terminal interface,
I-8
selecting meaning of, 3-12
March 2001
Index
IN-3