Resetting the DSU/CSU
Use the Reset command to perform a power-on reset of the DSU/CSU.
Procedure
To reset the DSU/CSU:
Download Operations
The Download command is for use by service personnel only. Loss of primary data
could result from improper use.
3160-A2-GB24-10
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the
on the screen.
4. Select Reset.
Control:
ClrReg
Reset
F2
F1
5. From the Device Reset screen, press F1 to initiate a reset of the DSU/CSU
(the power-on sequence screen appears). Press F2 instead to return to the
Control screen without initiating a reset.
Device Reset:
Yes
No
F2
F1
March 2001
key until the Ctrl selection
key until the Reset selection appears
F3
F3
3. Using the Front Panel
3-15