Acquiring/Releasing The User Interface; Acquiring The Active User Interface - Paradyne 3160-A4 Operator's Manual

Acquiring/Releasing the User Interface

You can access the user interface from either the front panel, the COM port, the
MODEM port (for standalone DSU/CSUs), or the SDCP (for carrier-mounted
DSU/CSUs). The DSU/CSU allows only one user interface to be active at a time.
The front panel is the default user interface at power-on or after a reset. It is also
the default during a software download or when a failure occurs at either the local
or remote PC interface.
You can switch an inactive user interface to active if:
T
T
T

Acquiring the Active User Interface

To acquire the active user interface, press any key. If you are using the PC
interface, use the mouse to click on the desired Function key.
The top-level menu screen appears on the active user interface, regardless of
what screen was displayed at the previous active user interface.
The inactive interface displays the following message when a Function key is
pressed or a connection is made on the inactive user interface and control cannot
be switched because the currently active interface is in use. On the screen, either
Ft. Panel (front panel), Com Port, Modem, or SDCP is displayed in the user
interface ( User I/F ) field.
3160-A2-GB24-10
The current active user interface has had no activity (no key was pressed) for
at least five minutes.
The active user interface has been released with the Release command.
The active interface connection is broken. This includes the call disconnect for
a modem interface or the termination of the front panel emulation program on
a locally attached PC (if the PC supports DTR) or the termination of the async
terminal interface on a remote or locally attached terminal.
DSU ESF
Stat Test Cnfig
F2
F1
DSU ESF
User I/F active
F2
F1
March 2001
F3
F3
5. Security
5-5