Block Or Acami Assignment Method - Paradyne 3160-A4 Operator's Manual

Block or ACAMI Assignment Method

The Assign By configuration option screen appears after you select a port.
Procedure
To assign by the block or ACAMI method:
3160-A2-GB24-10
1. Press F2 for Block or F3 for ACAMI.
Assign By:
Next Block
F2
F1
or
Assign By:
Next Block
F2
F1
2. Press F1 (Next) to display the next configuration option (Port Rate).
3. Use the or key to scroll the desired port rate onto the screen. Rates
scroll in groups of three. Available selections depend on the current base rate
selected for the port. Press the corresponding Function key to select the port
rate. Then, select Next to display the Start At configuration option on the
screen.
Port Rate:384
Next 64
F2
F1
NOTE:
For port-to-port mapping, the procedure is complete after the port rate is
selected.
March 2001
ACAMI
F3
ACAMI
F3
128
F3
4. Configuration
4-35