Paradyne 3160-A4 Operator's Manual page 294

I. Asynchronous Terminal Interface Operation
Figure I-6.
I-10
2. From the Load Configuration From screen, select a configuration option set to
load (Current, Customer 1, Customer 2, Default Factory 1, or Default
Factory 2). You cannot edit the Default Factory configuration options, but you
can display them.
After selecting the set of configuration options to load, the Configuration
Edit/Display screen appears
main/config/edit
Customer ID: Node A
Slot: xx
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
Configuration Edit/Display Screen
3. Select a functional group to display or edit.
NOTE:
Screen displays may vary depending on the model and configuration of the
DSU/CSU. For example, DTE and Copy Ports are not displayed for the
single-port DSU/CSU.
March 2001
(Figure I-6, Configuration Edit/Display
CONFIGURATION EDIT/DISPLAY
Network
DTE
Sync Data Ports
Copy Ports
Cross Connect
General Options
User Interface
Alarms & Traps
Management and Communication
Screen).
Model: 31xx
MainMenu Exit
3160-A2-GB24-10