Aborting Loopbacks - Paradyne 3160-A4 Operator's Manual

Aborting Loopbacks

The Abort Loopback command stops all loopback tests or any selected loopback
test currently active on the DSU/CSU.
Procedure
To abort one or more loopback tests:
3160-A2-GB24-10
4. Select DTLB.
Loopback:
RLB DCLB
F1 F2
5. From the DTLB screen, press the Function key for the port for which you want
to perform the data terminal loopback. Use the scroll keys, if necessary.
Loopback: DTLB
Prt1 Prt2
F1 F2
Test Started appears on Line 2. If a Data Terminal loopback is already in
progress, the Already Active message appears. If an invalid combination
of loopbacks is in progress, the error message Invld Test Combo appears
(see Table 8-2, Valid Loopback
combinations).
1. From the top-level menu screen, select Test.
2. From the Test screen, select Lpbk.
Test:
Rlpbk Lpbk
F1 F2
3. From the Loopback screen, select Abort.
Loopback:
Abort LLB
F1 F2
March 2001
DTLB
F3
Prt3
F3
Combinations, for valid loopback test
Ptrns
F3
PLB
F3
8. Testing
8-15