Paradyne 3160-A4 Operator's Manual page 129

Procedure
To clear the performance registers:
3160-A2-GB24-10
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the
on the screen.
4. Select ClrReg.
Control:
Rel LED
F1 F2
5. From the Clear Prf Regs screen, press F1 to clear the User registers.
Clear Prf Regs:
User Prt1
F1 F2
If you selected User, the User performance registers are cleared, all
accumulators are reset to zero, and all status registers are cleared. The
current interval timer, the number of valid intervals count, and the total 24-hour
counts are reset to zero. The Command Complete message then appears.
March 2001
7. Monitoring and Troubleshooting
key until the Ctrl selection
key until the ClrReg selection appears
ClrReg
F3
Prt2
F3
7-9