3. Using the Front Panel
3-14
If you chose T1, the LED Display screen lists the LED signals, two at a time,
on the second line. A vertical bar at the left of the LED name indicates the
condition is ON, while an underscore indicates the condition is Off.
LED Display:
_Test
_NetSig
F1
F2
If you chose a port, the Port n LEDs screen lists the LED signals, two at a time,
on the second line. A vertical bar at the left of the LED name indicates the
condition is ON, while an underscore indicates the condition is Off.
Port n LEDs:
_DTR
_TXD
F1
F2
5. Use the
and
keys to scroll LED names onto the screen.
March 2001
F3
F3
3160-A2-GB24-10