Configuring The 10Baset Port (Models 3160 And 3165) - Paradyne 3160-A4 Operator's Manual

Configuring the 10BaseT Port (Models 3160 and 3165)

To configure the 10BaseT port for SNMP access:
T
T
T
Procedure
To configure the 10BaseT port:
3160-A2-GB24-10
Set the ENET Use configuration option to your network protocol.
Set the 10BaseT port's IP address and subnet mask.
Set the default gateway address.
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. Select User.
Edit:
NET Gen
F2
F1
5. Press F1 (Next) until the ENET Use configuration option appears.
6. Select the appropriate protocol for your network.
ENET Use:
Next 802.3
F2
F1
March 2001
User
F3
Ver2
F3
4. Configuration
4-9