Paradyne 3160-A4 Operator's Manual page 88

4. Configuration
Procedure
To select the data port:
4-34
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
the screen.
5. Select Chan.
Edit:DTE
Port NET
F2
F1
6. From the Channel Config screen, press the
screen.
7. Select the desired port by pressing its corresponding Function key.
Channel Config:
Prt1 Prt2
F1
8. The configuration option for the data port channel allocation destination
appears on the screen. Select NET to assign this port to the network interface,
select DTE to assign this port to the DTE Drop/Insert (DSX-1) interface, or
press the key and the appropriate Function key to assign this port to
another port.
Assign To:NET
Next NET
F2
F1
9. Press F1 (Next) to display the appropriate configuration options on the screen.
Use one of the following examples, depending on whether you are assigning
by block, ACAMI, or individual channel.
March 2001
key until the Chan selection appears on
Chan
F3
Prt3
F2 F3
DTE
F3
key to scroll the ports onto the
3160-A2-GB24-10