Displaying Unit Identity - Paradyne 3163 User Manual

Displaying Unit Identity

The identity of the DSU/CSU (serial number, model
number, software revision level, hardware revision level,
and customer identification) is available through the
Status branch of the front panel menu (see Appendix A,
Front Panel Menu).
The customer identification is the only identity number
you can change.
"
Procedure
To display the DSU/CSU's identity (ID):
1. From the top-level menu screen, select Stat.
DSU ESF
Stat
F1
2. From the Status screen, press the
ID selection appears on the screen.
3. Select ID.
Status:
TStat
F1
3163-A2-GB20-10
Test Cnfig
F2 F3
key until the
LED ID
F3
F2
4. The following screens appear in the order listed
each time you press the
March 1999
key.
Identity:
Ser= xxxxxxx
F3
F1 F2
Identity:
Mod= xxxx - xx - xxx
F1 F2 F3
Identity:
Cust ID= xxxxxxxx
F1 F2 F3
Identity:
SRev= xx . xx . xx
F1 F2 F3
Identity:
CCA= xxxx - xxx
F3
F1 F2
Operation
3-7