Aborting A Lamp Test - Paradyne 3160-A4 Operator's Manual

8. Testing

Aborting a Lamp Test

Procedure
To abort the Lamp test:
8-22
5. The following screens alternately appear on the LCD until you press a
Function key to return to the Lamp Test screen. In addition, all LEDs blink.
F1 F2
0123456789 : ; < = > ?
@ABCDEFGHIJKLMNO
F1 F2
6. When you are satisfied that all LEDs are lighting and the LCD is functioning
properly, abort the Lamp test from the Lamp Test screen. If there is no activity
on the DSU/CSU front panel for five minutes, the Device Health and Status
screen appears automatically. However, the Lamp test remains active until it is
aborted.
1. Display the Lamp Test screen. To do this when the LCD is alternating the
Lamp test screens, press any Function key. Otherwise, follow
Step 3 on page 8-21 for starting a Lamp test.
Lamp Test:
Abort Start
F2
F1
2. From the Lamp Test screen, select Abort.
Lamp Test:
Abort Start
F2
F1
March 2001
F3
F3
F3
F3
Step 1 through
3160-A2-GB24-10