Clearing Ds0 Channel Allocation - Paradyne 3160-A4 Operator's Manual

Clearing DS0 Channel Allocation

You can clear (deallocate) all the DS0 channels currently allocated to either the
network interface, the DTE Drop/Insert (DSX-1) interface, or the synchronous data
ports.
Procedure
To clear DS0 channel allocation:
3160-A2-GB24-10
3. Line 1 displays the 24 DS0 channels for the DTE Drop/Insert (DSX-1)
interface. Pressing the
groups of three. Line 2 displays whether the DS0 channel in Line 1 is a data
channel (Data) or a voice (RBS) channel. Each time that you press the
Function key located below the desired channel, the display in Line 2 toggles
between Data and RBS.
D1 D2
RBS RBS
F1 F2
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
the screen.
5. Select Chan.
Edit:
Port NET
F2
F1
6. From the Channel Config screen, select Clear.
Channel Config:
Dsply Clear
F2
F1
March 2001
or key scrolls the channels onto the screen in
D3
RBS
F3
key until the Chan selection appears on
Chan
F3
DTE
F3
4. Configuration
4-39