Using The Integral Modem; Using The Integral Modem In Standalone Dsu/Csus - Paradyne 3160-A4 Operator's Manual

Using the Integral Modem

Using the Integral Modem in Standalone DSU/CSUs

The standalone DSU/CSU's integral modem enables your DSU/CSU to
communicate with remote devices to display alarm messages or to function as the
user interface. The carrier-mounted DSU/CSU does not have an integral
modem.
The Call command, available from the Control branch of the menu tree, provides
the following functions to initiate and terminate modem connections:
T
T
T
T
For additional information, refer to
Appendix C, Configuration Options .
3160-A2-GB24-10
Pass – Initiates a call through the integral modem to access a far-end
DSU/CSU's front panel from your DSU/CSU's front panel (or PC attached to
the COM port).
Dial – Initiates a call through the integral modem to a printer, ASCII terminal,
or PC. Sets up a semipermanent connection to route alarm messages to the
specified destination.
Disconnect – Disconnects an active modem connection.
Change Directory – Allows entry of phone numbers into the internal phone
directories.
March 2001
User Interface Configuration Options
6
in
6-1