Selecting The Port - Paradyne 3160-A4 Operator's Manual

4. Configuration

Selecting the Port

The SNMP manager, Telnet device, or network device (e.g., a router) can be
directly connected to the communications (COM) port. Use the MODEM port when
accessing the DSU/CSU through a dial-up connection.
On the Model 3164, an external LAN Adapter can be connected to either the COM
port or the auxiliary (AUX) port to provide Ethernet or Token Ring connectivity.
Also, the DSU/CSU can be daisy chained together by connecting the COM port of
one Model 3164 to the AUX port of another, providing SNMP or Telnet connectivity.
T
T
T
The example shown below assumes that the COM port is being used as the link to
the SNMP or Telnet system.
Procedure
To select the COM port as the SNMP or Telnet link:
4-14
The COM port can support either synchronous or asynchronous PPP, or
asynchronous SLIP at data rates of up to 38,400 bps.
The AUX port can support data rates up to 38,400 bps.
The MODEM port can support either synchronous or asynchronous PPP, or
asynchronous SLIP at data rates of up to 2400 bps.
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
screen.
5. Select User.
Edit:
Chan Gen
F1 F2
6. Press F1 (Next) until the Com Use configuration option appears.
7. Select Mgmt to configure the COM port as the SNMP or Telnet link.
Com Use:
Next Mgmt
F2
F1
March 2001
key until the User selection appears on the
User
F3
ASCII
F3
3160-A2-GB24-10