Configuring For Network Timing - Paradyne 3160-A4 Operator's Manual

4. Configuration

Configuring for Network Timing

Procedure
To configure for network timing:
4-42
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
screen.
5. Select Gen.
Edit:
NET Chan
F1 F2
6. Press F1 (Next) to display the next configuration option (Clock Src).
7. Select the master clock source. For network, press F2 (note that network is
also the default).
Clock Src:NET
Next NET
F1 F2
March 2001
key until the Gen selection appears on the
Gen
F3
DTE
F3
3160-A2-GB24-10