System Fields; Identity Information - Paradyne 7610 SNMP DSU User Manual

Customizing the SNMP DSU

System Fields

Identity Information

Î
Î
3-2
The three System entry fields are alphanumeric and provide 127 characters for
each field. The System entries appear on the Identity display as shown in the
next section. The SNMP System entry fields are:
System Name: The general SNMP system name
System Location: The physical location of the SNMP managed device
System Contact: Identification information, such as contact name, phone
number, or mailing address
Press Ctrl-a to switch to the screen function key area below the dotted line.
Select Save and press Return. When Save is complete, Command Complete
appears at the bottom of the screen.
The Identity screen provides identification information about the DSU. To view
information on the three System entries beyond the 40 characters on the screen,
place the cursor on the first or last character and press the left or right arrow.
To access the Identity screen, follow this menu selection sequence:
Main Menu Status
main/status/identity
Device Name: NE815378
System Name: lllQJ98-001
System Location: Bldg. A412, 2nd Floor, Left cabinet
System Contact: Joe Smith 800-555-5555 pager 888-555-5555
Serial Number:
Model Number:
Software Revision:
Hardware Revision:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
November 1997
Identity
IDENTITY
1234567
7610-A1-201
01.00.00
2048-80A
Model: 7610
Î Î
Î Î
MainMenu Exit
7610-A2-GB20-10