Setting The 10Baset Port Subnet Mask - Paradyne 3160-A4 Operator's Manual

Setting the 10BaseT Port Subnet Mask

The subnet mask for the 10BaseT port IP address is set automatically according
to the class of the IP address. It can also be set manually in a fashion similar to the
IP address. See
instructions.
Procedure
To change the subnet mask for the 10BaseT port IP address:
3160-A2-GB24-10
9. When you are through changing the IP address, you must press F3 (Save) to
save the value. Otherwise, the original value will be retained.
010.155.111.222
Up Down
F2
F1
Setting the 10BaseT Port IP Address
1. From the Edit screen, press the
screen.
2. Select User.
Edit:
User Alarm
F1 F2
3. Press F1 (Next) until the ENET NetMask configuration option appears.
4. Press F2 (Edit) to edit the subnet mask.
ENET NetMask:
Next Edit
F1 F2
5. Use the and keys to position the cursor under the digit you want to
change. Press F1 (Up) to increment the digit or F2 (Down) to decrement the
digit.
255.255.240.000
Up Down
F2
F1
6. When you are through changing the subnet mask, you must press F3 (Save)
to save the value. Otherwise, the original value will be retained.
March 2001
Save
F3
on page 4-10 for complete
key until the User selection appears on the
Mgmt
F3
Clear
F3
Save
F3
4. Configuration
4-11