Paradyne 3160-A4 Operator's Manual page 86

4. Configuration
4-32
6. From the Channel Config screen, select Dsply.
Channel Config:
Dsply Clear
F1 F2
7. From the Display Chan screen, select NET to display the channels allocated to
the network interface. Or, select DTE to display the channels allocated to the
DTE Drop/Insert (DSX-1) interface.
Display Chan:
NET DTE
F1 F2
8. If you selected NET the channels allocated to the network interface are
displayed. Line 1 displays the 24 channels for the network interface, while Line
2 displays what is allocated to the DS0 channel shown in Line 1. Pressing
the or key scrolls the channels onto the screen in groups of three.
N1 N2
D2 D3
F2
F1
If you selected DTE, the channels allocated to the DTE Drop/Insert (DSX-1)
interface are displayed. Line 1 displays the 24 channels for the DTE
Drop/Insert (DSX-1) interface, while Line 2 displays what is allocated to the
DS0 channel shown in Line 1.
D1 D2
– N1
F2
F1
March 2001
DTE
F3
Ports
F3
N3
Prt1
F3
D3
N2
F3
3160-A2-GB24-10