Call Routing Mailbox Options - NEC SL 1000 Programming Manual

SL1000/SL1100
Level:
IN
Description
Use Program 47-08 : Call Routing Mailbox Options to set the options for mailboxes assigned as
Program
Call Routing Mailboxes in 47-07-02 : Routing Mailbox Type.
47
Input Data
Item
No.
01 Dial Action Table
02 Screened Transfer
Timeout
03 Time Limit for Dialing
Commands
04 Fax Detection
05 Fax Extension
2-430

47-08 : Call Routing Mailbox Options

Routing Mailbox Number
Item Input Data
1 ~ 32 (Dial Action Table
1 ~ 32) (V3.0 Changed)
0 ~ 255 seconds
Entering 0 causes imme-
diate recall.
0 ~ 99 seconds
Entering 0 causes the
Automated Attendant to
immediately route callers
to the Timeout destina-
tion programmed in the
active Dial Action Table.
0 = No (Disabled)
1 = Yes (Enabled)
Up to four digits
(SL1000)
Up to eight digits
(SL1100)
Program 47 : InMail
Description
Use this option to assign the Dial Action
Table to the Call Routing Mailbox. The Dial
Action Table defines the dialing options for
the call Routing Mailbox.
(Scrn Trf Timeout)
Use this option to set how long a Screened
Transfer (TRF) from the Automated At-
tendant rings an unanswered extension
before recalling.
This option has a similar function as Cus-
tomize: Mailbox Options: Call Routing:
[Call Handling] Options: Delay Rings Be-
fore Redirect Transfer in InMail.
(Dialing Timeout)
This option determines how long InMail
waits for an Automated Attendant caller to
dial before routing the call to the Timeout
destination.
Be sure your Dial Action Tables have a
Timeout action programmed.
If the caller waits too long to dial:
When the associated Dial Action Table
has a Timeout action programmed, the
caller routes to that destination.
When the associated Dial Action Table
does not have a Timeout action program-
med, the Instruction Menu repeats three
times and then InMail hangs up.
Use this option to enable or disable Fax
Detection for the Call Routing Mailbox. In
enabled, the InMail Automated Attendant
(when using this Call Routing Mailbox) de-
tects incoming fax CNG tone. The fax call
then routes to the company fax machine
according to the setting of 47-01-06 : Fax
Extension. If disabled, the Automated At-
tendant does not detect incoming fax calls.
ISSUE 3.01
01 ~ 32
Default
1 (Dial Action
Table 1)
15 seconds
5 seconds
0
No Setting
Program 47 : InMail