Dial Analysis Table For Ars/F-Route Access - NEC SL 1000 Programming Manual

ISSUE 3.01

44-02 : Dial Analysis Table for ARS/F-Route Access

Level:
IN
Description
Use Program 44-02 : Dial Analysis Table for ARS/F-Route Access to set the Pre-Transaction
Table for selecting ARS/F-Route.
Input Data
Dial Analysis Table Number
Item Item
No.
01 Dial
02 Service Type
Programming Manual
Program 44 : ARS/F-Route Setup
Input Data
Up to four digits Set the number of digits to be analyzed by
(SL1000) the system for ARS routing.
Up to eight digits
(SL1100)
(Use line key 1 for a
Don't Care digit, @)
0 = No setting (None) • Service Type 1 (Extension Number)
1 = Extension Call (Own) The number goes to an extension after
2 = ARS/F-Route Table deleting the front digit(s).
(F-Route) Additional Data
3 = Dial Extension Ana- Assign the digit(s) to be deleted on top
lyze Table (Option) of the number for extension number us-
age. At least one digit must be deleted.
• Service Type 2 (ARS/F-Route)
The number is controlled by ARS/F-
Route table.
Additional Data:
If the ARS/F-Route Time Schedule is
not used, assign the ARS/F-Route table
number for Program 44-05.
If the ARS/F-Route Time Schedule is
used, assign the ARS/F-Route selection
number for Program 44-04.
• Service Type 3 (Dial Extension Analyze
Table)
The total length of the number exceeds
more than 8 digits.
Additional Data:
Assign the Dial Extension Analysis Ta-
ble number to be used in Program
44-03.
SL1000/SL1100
001 ~ 120
Description
Program
44
Default
No Setting
0
2-397