Registration Of Standard Sip Terminal - NEC SL 1000 Programming Manual

SL1000/SL1100
Level:
IN
(This Program is available for V1.5 or higher)
Description
Program
Use Program 15-24 : Registration of Standard SIP Terminal to register data in the standard SIP
15 terminal where Register is not used.
Input Data
Item
No.
01 Using IP Address
02 Call Procedure Port
03 Registration Setting
when REGISTER isn't
used
Conditions
None
Feature Cross Reference
None
2-166
Program 15 : Extension, Basic Setup

15-24 : Registration of Standard SIP Terminal

Item Input Data
0.0.0.0 ~
255.255.255.255
0 ~ 65535
0 = Disable
1 = Enable
Description
IP Address of the standard SIP terminal
that is used as the SIP extension. When
Program 15-24-03 is set to 1, this Program
cannot be changed from 0.0.0.0 (except
using PCProgramming).
Call procedure port of the standard SIP
terminal that is used as SIP extension.
Enables or disables the Registration meth-
od. An error will occur if Program 15-24-01
is 0.0.0.0 and this Program is set to 1 (ex-
cept using PCProgramming).
Program 15 : Extension, Basic Setup
ISSUE 3.01
Default
0.0.0.0
5060
0