Lcr Carrier Table - NEC SL 1000 Programming Manual

ISSUE 3.01
Program 26 : ARS Service & Least Cost
Level:
IN
Description
Use Program 26-05 : LCR Carrier Table to define the LCR Access Codes and routing options.
These options include Authorization codes and Cost Center
Input Data
Item Item
No.
01 Delete Digits
02 Access Code
03 Authorization Code
Table
04 Cost Center Code
Conditions
The settings must comply with the requirements of the Indirect Carrier. The operation of the @ symbol
within the Access Code depend on the type of trunk. For analog trunk set as Dial Pulse the @ symbol
defines change to DTMF dialing. For ISDN trunks the @ symbol defines that a Connect Message is
received and then DTMF digits are sent in the B-Channel.
Feature Cross Reference
• LCR-Least Cost Routing
Programming Manual
Input Data
0 - 16 Enter the quantity of leading digits that
need to be deleted
Maximum 16 digits Enter the Access Code and Option to
(0 ~ 9, * , #, P, @) route to the Indirect Carrier
P = Pause
@ = Change to DTMF or
wait for Connect
0 ~ 10 Enter the table number that contains the
(0 = No Authorization correct Authorization code.
code)
0 = Not Used Optionally enter a cost center code.
1 = Used

26-05 : LCR Carrier Table

Description
SL1000/SL1100
Routing
Program
26
Default
0
No Setting
0
0
2-323