NEC SL 1000 Programming Manual page 447

ISSUE 3.01
Item Item
No.
05 Recording Conversa-
tion Beep
06 Message Waiting
Lamp
07 Auto Attendant Direct
to Voice Mail
08 Forced Unscreened
Transfer
09 Auto Time Stamp
10 System Administrator 0 = No (Disabled)
Programming Manual
Input Data
0 = No (Disabled) (Rec Conv Beep)
1 = Yes (Enabled) Use this option to enable or disable the
Conversation Record beep. If enabled, all
parties on a call hear the voice prompt
"Recording", followed by a single beep
when the extension user initiates Conver-
sation Record. If disabled, the voice
prompt and beep do not occur. When you
disable the Conversation Record beep, the
following voice prompts do not occur while
InMail records the conversation:
Recording
(followed by a beep)
That mailbox is full
(if the mailbox message storage capacity
is reached)
You have reached the recording limit
(if the recorded message is too long)
Provides an additional Conversation Re-
cord beep. This beep repeats according to
the setting of Program 45-01-06 : Voice
Mail Integration Options : Record Alert
Tone Interval Time (0 ~ 64800 seconds).
To disable Conversation Record beep, en-
ter 0 for this option.
0 = No (Disabled) (Update MW Lamp)
1 = Yes (Enabled) Use this option to enable or disable Mes-
sage Waiting light at the extension associ-
ated with the Subscriber mailbox. For Sub-
scriber Mailboxes, you should leave this
option enabled. For Guest Mailboxes, you
should leave this option disabled.
0 = No (Disabled) Use this option to enable or disable Auto
1 = Yes (Enabled) Attendant Direct to VM. When a subscriber
enables Auto Attendant Direct to VM, an
Automated Attendant caller routes directly
to the mailbox, hears the greeting, and is
asked to leave a message. A subscriber
can also enable Auto Attendant Direct to
VM while recording their mailbox greeting.
0 = No (Disabled) (Forced UTRF)
1 = Yes (Enabled) Use this option to enable or disable Auto-
mated Attendant Forced Unscreened
Transfer for the Subscriber Mailbox. If ena-
bled, each Screened Transfer (TRF) to the
extension is converted to an Unscreened
Transfer (UTRF). If disabled, Screened
Transfers from the Automated Attendant
occur normally.
0 = No (Disabled) Use this option to enable or disable Auto
1 = Yes (Enabled) Time Stamp for the Subscriber Mailbox. If
enabled, after the subscriber listens to a
message InMail announces the time and
date the message was left. Auto Time
Stamp also announces the message send-
er (if known).
A subscriber can also enable Auto Time
Stamp from their mailbox.
(System Admin)
1 = Yes (Enabled) Use this option to designate the Subscrib-
er Mailbox as a System Administrator. This
allows the subscriber to use the options af-
ter logging onto their mailbox.
SL1000/SL1100
Description Default
1
Program
47
1
0
0
0
0
2-425