Programmable Function Keys - NEC SL 1000 Programming Manual

SL1000/SL1100
Level:
SA
Description
Use Program 15-07 : Programmable Function Keys to assign functions to a multiline terminal line
Program
keys.
15 For certain functions, you can append data to the key basic function. For example, the function 26
appended by data 1 makes a Group Call Pickup key for Pickup Group 1. You can also program
Function Keys using Service Codes.
To clear any previously programmed key, press 000 to erase any displayed code.
Input Data
Default Settings
Line Key
LK01
:
LK12
LK13
:
LK24
Item No.
01
Default
Programmable keys 1 ~ 8 are Trunk Line keys (key 1 = Trunk Line 1, key 2 = Trunk Line 2, etc.). All
other programmable keys are undefined.
Function Number List
2-144
Program 15 : Extension, Basic Setup

15-07 : Programmable Function Keys

Extension Number
Function Number
* 01 (Trunk Line Key)
:
*
01 (Trunk Line Key)
0 (No setting)
:
0 (No setting)
Item
Line Key Number 1 ~ 24
Function Number 0 ~ 99, #0 ~ #99
(Normal Function Code) (Service Code
851 by default)
* *
00 ~
(Appearance Function Code) (Service
Code 852 by default)
Maximum four digits (SL1000)
Maximum eight digits (SL1100)
Input Data
99
Program 15 : Extension, Basic Setup
ISSUE 3.01
Additional Data
1
:
12
0
:
0
Additional Data
Refer to Table 2-2 Function Number
List on page 2-145.
Refer to Table 2-2 Function Number
List on page 2-145.