NEC SL 1000 Programming Manual page 38

SL1000/SL1100
Item
No.
01 DTMF Dial Tone Detection
Program
10
Conditions
• CPU has 20 (SL1000) 16 (SL1100) Channel DSP resources (receivers) only for basic CPU Unit.
VMDB has additional 16 DSP resources which you can add to CPU. Addition to that EXIFE also
each has 32 DSP resource (receivers) only for expand unit.
• In case of 0 (= Common) is selected, and if 14-02-10 (Caller ID receive ability) is set to "Yes", DSP
resources are always allocated to analog trunk only, not for analog extension. If 14-02-10 is set to
"No", the DSP resources can be used for both analog trunk and analog extension commonly.
Feature Cross Reference
• Caller ID
• Central Office Calls, Placing
• Direct Inward Dialing (DID)
• Direct Inward System Access (DISA)
2-16
Item
0 = Common Use
1 = Extension Only
2 = Trunk Only
Input Data
Program 10 : System Configuration Setup
ISSUE 3.01
Default
Resource 01 - 132 = 0
(Common) (SL1000)
Resource 01 - 20 are
Basic resource (only
use Basic Board)
(SL1000)
Resource 21 - 36 are
vmdb resource (only
use Basic Board)
(SL1000)
Resource 37 - 68 are
EXIFE1 resource (only
use Expansion 1)
(SL1000)
Resource 69 - 100 are
EXIFE2 resource (only
use Expansion 2)
(SL1000)
Resource 101 - 132 are
EXIFE3 resource (only
use Expansion 3)
(SL1000)
Resource 01 - 96 = 0
(Common) (SL1100)
Resource 01 - 16 are
Baic resource (only use
Basic Board) (SL1100)
Resource 17 - 32 are
vmdb resource (only
use Basic Board)
(SL1100)
Resource 33 - 64 are
EXIFE1 resource (only
use Expansion 1)
(SL1100)
Resource 65 - 96 are
EXIFE2 resource (only
use Expansion 2)
(SL1100)