Ani/Dnis Service Options - NEC SL 1000 Programming Manual

ISSUE 3.01
Level:
IN
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI/DNIS service option setup for
E&M Class of Service.
Input Data
Class of Service
Item Item
No.
01 Receive Format
02 Delimiter Dial
Code
03 Route Setup of
Receive Dial
Programming Manual
Program 34 : Tie Line Setup

34-09 : ANI/DNIS Service Options

Input Data
0 = Address Use this option to specify the format
1 = * ANI * of the ANI/DNIS data received from
2 = * DNIS * the Telco. Make sure your entry is
* * *
3 = ANI Address compatible with the service the Tel-
4 = * ANI * DNIS * co provides. The character
5 = * DNIS * ANI * cates a delimiter.
*
( = Delimiter Code)
1 ~ 9, 0, #, * This option defines the character
Telco uses as a delimiter (see en-
tries 1 ~ 5 in Item 1 above). Valid
entries are 0 ~ 9, #, and
0 = Fixed Route (Item This option specifies the source of
08) (No Routing) the data the system uses to route in-
1 = Routes on Re- coming ANI/DNIS calls. If option 2 is
ceived DNIS or Ad- selected, refer to Program 34-09-04.
dress Data
2 = Routes on Re-
ceived ANI Data
01 ~ 15
Description
* indi-
If Program 34-01-02 is selected
to 2 (MF), this Program works
only as 4 = * ANI * DNIS * .
* .
SL1000/SL1100
Default Related
Program
COS 01 = 0 34-01-02
COS 02 ~ 15 = 0 34-09-02
COS 01 = * 34-09-01
*
COS 02 ~ 15 =
COS 01 = 0 22-09-01
COS 02 ~ 15 = 0 22-11-01
34-09-04
34-09-08
2-365
Program
34