NEC SL 1000 Programming Manual page 442

SL1000/SL1100
Item
No.
05 Auto Erase/Save of
Messages
Program
06 Message Retention
47
07 Recording Conversa-
tion Beep
08 Message Waiting
Lamp
09 Auto Attendant Direct
to Voice Mail
2-420
Item Input Data
0 = Erase
After the subscriber lis-
tens to the entire new
message and hangs up,
InMail erases the mes-
sage.
1 = Save
After the subscriber lis-
tens to the entire new
message and hangs up,
InMail saves the mes-
sage.
0 ~ 99 Days
(0 = Indefinite)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
Description
Use this option to determine what happens
when a Subscriber Mailbox user complete-
ly listens to a new message and then exits
the mailbox without either saving (SA) or
erasing (E) the message. Depending on
the setting of this option, InMail either au-
tomatically saves or erases the message.
If the mailbox user hangs up before listen-
ing to the entire new message, InMail re-
tains the message as a new message.
Use this option to determine how long a
Subscriber Mailbox retains held and saved
messages. If a message is left in a Sub-
scriber Mailbox longer than this interval,
InMail deletes it.
(Rec Conv Beep)
Use this option to enable or disable the
Conversation Record beep. If enabled, all
parties on a call hear the voice prompt
"Recording", followed by a single beep
when the extension user initiates Conver-
sation Record. If disabled, the voice
prompt and beep do not occur. When you
disable the Conversation Record beep, the
following voice prompts do not occur while
InMail records the conversation:
Recording
(followed by a beep)
That mailbox is full
(if the mailbox message storage capacity
is reached)
You have reached the recording limit
(if the recorded message is too long)
Provides an additional Conversation Re-
cord beep. This beep repeats according to
the setting of Program 45-01-06 : Voice
Mail Integration Options : Record Alert
Tone Interval Time (0 ~ 64800 seconds).
To disable the Conversation Record beep,
enter 0 for this option.
(Update MW Lamp)
Use this option to enable or disable Mes-
sage Waiting lamping at the extension as-
sociated with the Subscriber mailbox. For
Subscriber Mailboxes, you should leave
this option enabled. For Guest Mailboxes,
you should leave this option disabled.
(Auto-ATT DND)
Use this option to enable or disable Auto
Attendant Do Not Disturb. When a sub-
scriber enables Auto Attendant Do Not
Disturb, an Automated Attendant caller
routes directly to the mailbox, hears the
greeting, and is asked to leave a message.
A subscriber can also enable Auto Attend-
ant Do Not Disturb while recording their
mailbox greeting.
ISSUE 3.01
Default
1
0
1
1
0
Program 47 : InMail