NEC SL 1000 Programming Manual page 209

ISSUE 3.01
Item Item
No.
13 ISDN CLIP
14 Call Address In-
formation
15 Block Outgoing
Caller ID
16 Display E911 Di-
aled Extension
Name and Num-
ber
17 ARS Override of
Trunk Access
Map
19 Hotline for SPK
20 Hot Key Pad
21 Automatic Trunk
Seizing by Press-
ing SPK Key
22 Voice Over to
Busy Virtual Ex-
tension (SL1100)
23 Display indica-
tion for security
sensor detection
24 Display indica-
tion for emergen-
cy call by remote
inspection
Conditions
None
Feature Cross Reference
• Class of Service
Programming Manual
Input Data
0 = Off (when set to Off Determines if the ISDN calling line
the system will not identity presentation and screening
send any outbound
calling party informa-
tion.)
1 = On (when set to ON
the system will send
calling party informa-
tion for the station or
trunk.)
0 = Off
1 = On
0 = Off Turns off or on the system ability to
1 = On automatically block outgoing Caller
ID information when a user places a
If this option is on, the system auto-
matically inserts the Caller ID block
code (defined in Program 14-01-21)
before the user-dialed digits.
0 = Off Turns off or on an extension to dis-
1 = On play the name and number of the
extension that dialed E911.
0 = Off Turns off or on an extension ability
1 = On to override the trunk access map
programming for outgoing calls.
0 = Off The ability of an extension to have
1 = On Hotline activated or deactivated
when going off hook via the speaker
0 = Off The ability of an extension to make
1 = On a call by just dialing the number
without first going off hook.
0 = Off The ability of an extension to auto-
1 = On matically access Trunk Route when
going off hook via the speaker key.
0 = Off The ability of an extension to make
1 = On Voice Over to Busy Virtual Exten-
0 = Off
1 = On
0 = Off
1 = On
Description
COS 01 ~ 15 = 1
indicators are allowed.
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
call.
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
key.
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
sion.
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
SL1000/SL1100
Default Related
Program
10-03-05
15-01-04
14-01-20
14-01-21
20-08-09
2-187
Program
20