Section 3 How To Enter Programming Mode - NEC SL 1000 Programming Manual

SL1000/SL1100
tells you to enter the programming mode, dial 150701 from the telephone dial pad. After you do, you
will see the message "15-07-01 TEL" on the first line of the telephone display. This indicates the
program number (15-07), item number (01), and that the options are being set for the extension. The
second row of the display "KY01 =
* 01. The third row allows you to move the cursor to the left or right, depending on which arrow is
pressed. To learn how to enter the programming mode, refer to
page 1-2.
S 3 HOW TO ENTER PROGRAMMING MODE
ECTION
To enter programming mode :
1. Go to any working display telephone.
In a newly installed system, use extension (port 1).
2. Do not lift the handset.
3. Press Speaker.
* *
4. # # .
1-2
15-07-01 TEL
KY01 = *01
-
(IP Phone) (SL1000)
15-07-01 TEL
KY01 = *01
-
(SL1100)
* 01" indicates that Key 01 is being programmed with the entry of
+
+
How to Enter Programming Mode on
ISSUE 3.01
Introduction