NEC SL 1000 Programming Manual page 30

SL1000/SL1100
Item No.
17 ISDN Ringback Tone
18 Type of Number
19 Numbering Plan Identifica-
tion
Program
10
20 Network Exchange Selec-
tion
21 Number of Ports
For PRI (T1) PKG Setup
Item
No.
01 Logical Port Number
02 T1 Signal Format Selection
03 Zero Code Suppression
04 Line Length Selection
05 T1 Clock Source
2-8
Item
0 = Disable
1 = Enable
0 = Unknown
1 = International number
2 = National number
3 = Network Specific number
4 = Subscriber number
5 = Abbreviated number
0 = Unknown
1 = ISDN numbering plan
2 = Data numbering plan
3 = Telex numbering plan
4 = National standard numbering plan
5 = Private numbering plan
0 = Standard (same as NI-2)
1 = reserved
2 = reserved
3 = DMS (A211)
4 = 5ESS
5 = DMS (A233)
6 = 4ESS
7 = NI-2
0 = Auto
1 = 4 Ports
2 = 8 Ports
3 = 12 Ports
4 = 16 Ports
5 = 20 Ports
6 = 24 Ports
7 = 28 Ports
Physical Port Number
Item
Input Data
Input Data
1 ~ 126 (SL1000)
1 ~ 96 (SL1100)
0 = D4 (12 Multi Frame)
1 = ESF (24 Multi Frame)
0 = B8ZS
1 = AMI/ZCS
0 = 0 feet ~ 133 feet
1 = 133 feet ~ 266 feet
2 = 266 feet ~ 399 feet
3 = 399 feet ~ 533 feet
4 = 533 feet ~ 655 feet
0 = Internal
1 = External
Program 10 : System Configuration Setup
ISSUE 3.01
Description Default
System can provide ring-
back tone, by setting
10-03-17 is set to 1 : Ena-
ble.
ISDN Protocol definition.
Select the number type
for the ISDN circuit.
ISDN Protocol definition.
Select the Numbering
Plan used for the ISDN
circuit.
Select the ISDN protocol
for the ISDN circuit
01 ~ 24
Description Default
The start port number of a
T1 line is displayed, and
24 logic ports are auto-
matically assigned to a
DTI (T1) line.
0
0
0
0
0
0
0
0
0
1