Dr700 Server Information Setup - NEC SL 1000 Programming Manual

SL1000/SL1100
Level:
IN
Description
Use Program 10-46 : DR700 Server Information Setup to set up the information of DR700 Server.
Program
10 Input Data
Item
No.
01 Register Mode
04 Server Name
06 Register Port
07 Encryption Mode 0 = Off
08 Encryption Type
09 One Time Pass-
word
10 Start Port
11 Multicast IP Ad-
dress
12 Multicast Port
2-46
Program 10 : System Configuration Setup

10-46 : DR700 Server Information Setup

Item Input Data
0 = Normal
1 = Auto
2 = Manual
Up to 32 characters
0 ~ 65535
1 = On
Read Only:
0 = Mode 1
Up to 10 characters (0
*
~ 9, , #)
1 ~ 128 (SL1000)
1 ~ 120 (SL1100)
224.0.0.0 ~
239.255.255.255
0 ~ 65535
Description
Normal:
When the phone boots up, it reports
the ext. assigned in the phone or
chooses the next available exten-
sion in the system. Password is not
required.
Auto:
If set to Auto, the SIP user name
and password must be entered on
the actual IP phone. These settings
must match 84-22/15-05-27, or the
phone does not come on-line.
Manual:
When the phone boots up, it
prompts user to enter a user ID and
password before logging in. It
checks this user ID/password
against 84-22/15-05-27. If there is
no match, the phone does not come
online.
Assign the Server name to be used
in the SIP URL.
Assign the port number in which the
SIP messages are sent to on the
VoIPDB.
This same port number must be as-
signed in the SIP Multiline terminals.
If this command is changed, it re-
quires a CPU reset.
Web pro indicates password with
*
mark. (V3.0 Added)
This sets the Multicast IP address
so that two or more main devices
don't overlap on the same network,
or if Multicast is used by other IP
services.
Program 10 : System Configuration Setup
ISSUE 3.01
Default Related
Program
0
sipphd
5080
0
0
No Setting 10-46-07
1 10-46-01
224.0.0.10
30000