System Options For Multiline Telephones - NEC SL 1000 Programming Manual

SL1000/SL1100
Level:
IN
Description
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
Program
multiline telephones.
20
Input Data
Item
No.
01 Trunk Loop Key Op-
eration Mode
02 Trunk Group Ac-
cess Key Operating
Mode
03 BLF Control
(SL1100)
04 Retrieve the Line Af-
ter Transfer
2-176
Program 20 : System Option Setup

20-02 : System Options for Multiline Telephones

Item
0 = Keep Lamp
1 = Extinction
Mode
Incoming :
Talking :
(on Talking TEL)
Holding :
blink (on holding
0 = Outgoing / Incoming
1 = Outgoing
2 = Incoming
0 = Idle / Busy (ON/OFF)
1 = Busy / Idle (ON/OFF)
0 = Not Holding (No Keep)
1 = Holding (Keep)
Input Data
0 = Keep Lamp 1 = LED Off
300 IPM Red blink
Green Lighting LED Off
60 IPM Green LED Off
TEL)
Program 20 : System Option Setup
ISSUE 3.01
Description Default Related
Program
0
Use this option 0
to set the oper-
ating mode of
the extension
trunk group
keys. The keys
are for incom-
ing access,
outgoing ac-
cess, or both.
Set the condi- 1
tions under
which a Hot-
line, Reverse
Voice Over or
DSS Console
key indicates
that an exten-
sion is busy.
Refer to the
Reverse Voice
Over feature
for more infor-
mation.
Enable (1) or 0
disable (0) an
extension abili-
ty to answer a
call after it has
been transfer-
red, but before
it is answered.