Incoming Virtual Extension Ring Tone Order Setup - NEC SL 1000 Programming Manual

ISSUE 3.01
Program 15 : Extension, Basic Setup

15-10 : Incoming Virtual Extension Ring Tone Order Setup

Level:
SA
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set the priority (1 ~ 4)
for the Virtual Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an
extension simultaneously, the tone with the highest order number (e.g., 1) rings. The other keys only
flash. There are 50 Virtual Extension ports.
Input Data
Extension Number
Item No. Item
01 Priority Or- 1 ~ 4
der
Data 0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension Ring Tone
5 = Tone pattern 5 (SL1000)
6 = Tone pattern 6 (SL1000)
7 = Tone pattern 7 (SL1000)
5 = Tone Pattern 5 (V3.0 Added) (SL1100)
6 = Tone Pattern 6 (V3.0 Added) (SL1100)
7 = Tone Pattern 7 (V3.0 Added) (SL1100)
8 = Tone Pattern 8 (V3.0 Added) (SL1100)
Default
• By default, Virtual Extension ring tones have the following order :
Priority Order
1
2
3
4
Conditions
None
Programming Manual
Maximum four digits (SL1000)
Maximum eight digits (SL1100)
Input Data
When two or more virtual
extensions are set on a
function key on the tele-
phone, and the tone pat-
tern by which the sound
of each extension differs,
the priority of ring sound
is set up.
Ring Tone (Set in Program 15-08)
SL1000/SL1100
Description Related Program
0 (Tone Pattern 1)
1 (Tone Pattern 2)
2 (Tone Pattern 3)
3 (Tone Pattern 4)
Program
15
15-08
2-155