Add/Delete Digit For E&M Tie Line - NEC SL 1000 Programming Manual

SL1000/SL1100
Level:
IN
Description
Use Program 34-06 : Add/Delete Digit for E&M Tie Line to set digits that the system should add or
Program
delete for Tie Lines.
• Delete Digit
34
Some Tie Line networks pass the location number and extension number to the remote side. This
program allows the system to ignore such numbers for a call.
If individual extension users do not want to receive an incoming call, they could delete all digits
including the extension number.
• Add Digit
If a Tie Line network requires additional digits to reroute the call to a location, the digits for the
location can be added to the received digits.
Input Data
Item
No.
01 Delete Digit
02 Additional Dial Digits
Conditions
None
Feature Cross Reference
None
2-362
34-06 : Add/Delete Digit for E&M Tie Line
Incoming Trunk Group Number
Item
Program 34 : Tie Line Setup
Input Data
0 ~ 255 (255 = delete all digits)
*
Up to four digits (0 ~ 9, , #)
ISSUE 3.01
01 ~ 25
Default
0
No Setting
Program 34 : Tie Line Setup