Table of Contents
Advertisement
STOP DLP COMMUNICATION (STP)
Stop communications to DLP® Electronics temporarily, i.e. for DLP software upgrading.
SUBCODE
NONE
EXAMPLES:
(STP 0) Restart DLP communication
(STP 1) Stop DLP communication
(STP?) Request current state. Example response is (STP!000)
PROJECTOR PLATFORM AND MOTHERBOARD RELATED INFORMATION (SYS)
Query only command that returns version information.
SUBCODE
BACB
FACB
PIBB
EXAMPLES:
(SYS+BACB?) Returns backplane version information.
TARGET COLOR GAMUT (TCG)
Set the Target Color Gamut file. This file describes desired output colorimetry from the projector. For this control
to function the Measured Color Gamut Data must be accurate.
SUBCODE
Cxxx
NONE
EXAMPLES:
(TCG+C108 "Atlantis") Use file "Atlantis" on channel 108
(TCG+C108 ?) Get target color file name on channel 108
(TCG?L) List all available entries of target color control
ENABLE 3D (TDC)
Enable/disable 3D on the specified channel or the current channel. This controls the frame rate multiplication fea-
tures that allow for simulated three dimensional image projection.
SUBCODE
D4K25 Service Manual
020-100880-01 Rev. 1 (06-2012)
DESCRIPTION OF USE
0 - restart DLP communications;
1 - stop DLP communications.
DESCRIPTION OF USE
Return backplane version information.
Return faceplate version information.
Return PIB3G version information.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Select target color gamut for the current channel.
DESCRIPTION OF USE
Section 7: Serial API
7-23
Advertisement
Table of Contents
