Control Signal Compatibility - Christie D4K25 Service Manual

Section 8: Specifications
8.3

Control Signal Compatibility

8.3.1 Ethernet Port
Interface10Base-T/100-Base-TX
ConnectorFemale RJ-45
Bit Rate10 Mbps or 100 Mbps half and full duplex
8.3.2 RS232-PIB3G
InterfaceTIA-232
Connector9-pin subminiature D, female
Bit Rate115,200 bps
Flow ControlHardware (RTS/CTS)
Data Format1 start bit, 8 data bits, 1 stop bit, no parity
Communication ProtocolChristie Serial Protocol
8.3.3 RS232-ICP
InterfaceTIA-232
Connector9-pin subminiature D, female
Bit Rate38,400 (default), 57,600, 115,200 bps, not auto-detected
Flow ControlHardware (RTS/CTS)
Data Format1 start bit, 8 data bits, 1 stop bit, parity odd
8.3.4 GPIO Port
InterfaceOpto-LED inputs, TTL voltage output
Connector37-pin subminiature D, female
Number of I/O Lines16 - 8 inputs, 8 outputs including 1 health signal output
Type of ConnectionOpto-isolated
Input Current5mA nominal, 50mA maximum
Output Current50mA maximum
Input Forward Voltage Drop1.1V nom., 1.4V max. (@5mA)
8.3.5 Simple Contact Closure Interface (SCCI) Port
InterfaceOpto-LED inputs, TTL voltage outputs
Connector9-pin subminiature D, female
Number and type of I/O Input 1 - Lamp Off
Input 2 - Lamp On
Input 3 - Douser Open
Input 4 - Douser Closed
8-4 D4K25 Service Manual
020-100880-01 Rev. 1 (06-2012)