Christie D4K25 Service Manual page 118

Section 7: Serial API
Cxxx
NONE
EXAMPLES:
(TDC+C108 1) Enable 3D on channel 108
(TDC+C108?) Get 3D setting on channel 108
(TDC?) Get current 3D status
3D DARK TIME (TDK)
Set dark time for 3D control. This controls how much time between displayed images the output remains dark to
allow for the glasses on other gating mechanism to flip between the eyes.
SUBCODE
Cxxx
NONE
EXAMPLES:
(TDK+C101 1) Set dark time to 1 on channel 101
(TDK+C101?) Get dark time on channel 101
OUTPUT REFERENCE DELAY (PHASE) (TDP)
Set output reference delay phase for 3D control. This is an additional control for output timing relative to input
timing. The data range is -180 to 180.
SUBCODE
Cxxx
NONE
EXAMPLES:
(TDP+C101 1) Set output reference delay phase to 1 on channel 101
(TDP+C101?) Get output reference delay phase on channel 101
3D L/R DISPLAY REFERENCE (TDR)
Set the L/R display reference for 3D control.
SUBCODE
Cxxx
NONE
EXAMPLES:
(TDR+C101 1) Set L/R display reference to 1 on channel 101
(TDR+C101?) Get L/R display reference on channel 101
7-24
Replace xxx with the channel number. Valid range is 101 - 164.
Select 3D enable for the current channel
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Select dark time for the current channel
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Select output reference delay phase for the current channel
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Select L/R display reference for the current channel
D4K25 Service Manual
020-100880-01 Rev. 1 (06-2012)