Upgrade: Package Details Window - Christie D4K25 Service Manual

Section 3: Service Setups

3.5.3 Upgrade: Package Details Window

Table 3.3 Upgrade: Package Details Window
Control
Grid View
Upgrade Different Components
Only
ICP Only Force Install
Force Upgrade All
Force Install
3-16
Figure 3-15Upgrade: Package Details Window
Displays the available components in the upgrade package. This grid also
displays the currently installed version along with the new version found in
the upgrade package. If the current version and new version do not match,
the row will be bold to indicate what will be upgraded.
This selection instructs the upgrade system to only upgrade components
that are newer or older than the currently installed version. This is the
default and recommended upgrade method.
This selection instructs the upgrade system to force an ICP only install
regardless of what current version is installed.
This selection instructs the upgrade system to upgrade all components
found in the upgrade package. Components with the same version will also
be upgraded.
This selection instructs the upgrade system to clear all configurations and
upgrade all components on the system. This is equivalent to the projector
when it's released from the factory.
Description
D4K25 Service Manual
020-100880-01 Rev. 1 (06-2012)