Table of Contents
Advertisement
REMOTE ACCESS LEVEL (RAL) (CONTINUED)
NONE
PRTA
EXAMPLES:
(RAL 0) Disable remote serial protocol access for all Ethernet ports
(RAL?) Get access level for Ethernet ports (RAL!0)
(RAL+PRTA 2) Set remote serial protocol access level on port A to free access
(RAL+PRTA?) Get access level (RAL+PRTA!2)
REBOOT TPC (RBT)
Command for rebooting the TPC, requires argument 3.
SUBCODE
NONE
SCHEDULE (SCH)
Schedule a power up or a power down at a specific time.
SUBCODE
BPON
BPOF
POND
POFD
EXAMPLES:
(SC+BPON 1) Disable power on scheduling events, it will still be possible to set the time but no event will occur.
(SC+POFD "2011-07-11 23:00") Schedule a power off event at 11pm on 11 July, 2011
(SC+POND "") Set the power on event to no time - no event will be scheduled, if one was scheduled before it is removed.
(SC+BPOF?) Query the current setting for bypass power off events.
SCREEN FORMAT (SCF)
elect Screen format file which describes the geometry for the output image.
S
SUBCODE
D4K25 Service Manual
020-100880-01 Rev. 1 (06-2012)
Set the access level on Ethernet all ports.
Set the access level on RS232 port A.
DESCRIPTION OF USE
Reboot TPC, use 3 as argument other arguments have no effect.
DESCRIPTION OF USE
Bypass power on scheduling. 1 = enable, 0 = disable
Bypass power off scheduling. 1 = enable, 0 = disable
Set the power on date and time, setting the date/time to empty ("") will turn off power on scheduling until
a new date/time has been set. Format "yyyy-mm-dd hh:mm"
Set the power off date and time, setting the date/time to empty ("") will turn off power off scheduling until
a new date/time has been set. Format "yyyy-mm-dd hh:mm"
DESCRIPTION OF USE
Section 7: Serial API
7-19
Advertisement
Table of Contents
