Table of Contents
Advertisement
OUTPUT REFERENCE DELAY (TIME) (TDT)
Set output reference delay time for 3D control. This command controls how much delay between the input and out-
put reference timing.
SUBCODE
Cxxx
NONE
EXAMPLES:
(TDT+C101 1) Set output reference delay time to 1 on channel 101
(TDT+C101?) Get output reference delay time on channel 101
L/R DISPLAY SEQUENCE (TFD)
Set L/R Display Sequence for 3D control. This selects which signal is considered first in the source signal, the left
or the right.
SUBCODE
Cxxx
NONE
EXAMPLES:
(TFD?L) List all entries on Input Frame Dominance control
(TFD+C101 1) Set Input Frame Dominance to 1 on channel 101
(TFD+C101?) Get Input Frame Dominance on channel 101
3D FRAME RATE MULTIPLE (TFR)
Setup frame rate multiple for 3D control
SUBCODE
Cxxx
NONE
EXAMPLES:
(TFR?L) List all entries on the frame rate multiple factor
(TFR+C101 3) Set frame rate multiple to "4:2" on channel 101
(TFR+C101?) Get frame rate multiple on channel 101
GET CERTIFICATES (TIG)
Gets the ICP certificate.
D4K25 Service Manual
020-100880-01 Rev. 1 (06-2012)
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Select reference delay for the current channel
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Select L/R display sequence for the current channel
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Select 3D frame rate for the current channel.
Section 7: Serial API
7-25
Advertisement
Table of Contents
